Recent trends of the emission characteristics from the road construction industry

Bitumen is a black, thermoplastic, hydrocarbon material derived from the processing of crude oil. At ambient temperature, bitumen is solid and does not present any health/environmental risks. This is one of the main reasons that bitumen is widely used for road construction all over the world. But during manufacturing/modification according to its application, storage, transportation, and use of bitumen is heated giving off various hydrocarbons emissions. In recent years, there has been increasing interest in investigating the potential of bitumen emissions to cause health effects. This is mainly because of the reason that bitumen has small amount of poly-aromatic hydrocarbons, along with some other volatiles like benzene, toluene, etc., which are known to be carcinogenic in nature. Thus, assessment of the emission characteristics and health hazards of bitumen fumes may have far reaching industrial economic and public health implications. In this review, we will discuss about the emission characteristics from bitumen, asphalts, or road construction, which is mainly contributed by bitumen fumes. Sampling strategies and analytical methods employed are also described briefly.     

Changing scenario of municipal solid waste management in Kanpur city,India

Journal of Material Cycles and Waste Management - Generation of municipal solid waste (MSW) depends upon lifestyle, urbanization and income level of population. Solid waste management is one of the...     

Organochlorine pesticide contamination of ground water in the city of Hyderabad

Organochlorine pesticides are ubiquitous and persistent organic pollutants used widely throughout the world. Due to the extensive use in agriculture, organic environmental contaminants such as HCH, DDT along with other organochlorine pesticides are distributed globally by transport through air and water. The main aim of present study is to determine contamination levels of organochlorine pesticides in the ground water of Hyderabad City. Water samples were collected from 28 domestic well supplies of the city. For this study, random sampling technique was applied, all the samples were collected in high purity glass bottles and refrigerated at 4 degrees C until analysis. Solid Phase Extraction (SPE) is used for the extraction of organochlorine pesticide residues in water sample. The collected water samples were pre-filtered through a 0.45 microg glass fiber filter (Wattman GF/F) to remove particulate matter and were acidified with hydrochloric acid (6N) to pH 2.5. Methanol modifier (BDH, for pesticide residue analysis, 10 mL) was added to water sample for better extraction. SPE using pre-packed reversed phase octadecyl (C-18 bonded silica) contained in cartridges was used for sample preparation. Prior to the extraction, the C-18 bonded phase, which contains 500 mg of bonded phase, was washed with 20 mL methanol. The sample was mixed well and allowed to percolate through the cartridges with flow rate of 10-15 mL/min under vacuum. After sample extraction, suction continued for 15 min to dry the packing material and pesticides trapped in the C-18 bonded phases were eluted by passing 10 mL hexane and fraction was evaporated in a gentle steam of Nitrogen. In all samples pesticide residues were analyzed by GC (Chemito-8510) with Ni63 ECD detector. Helium was used as carrier gas and nitrogen was used as make up gas. The injection technique was split/split less. All the samples analyzed were found to be contaminated with four pesticides i.e. DDT, beta-Endosulfan, alpha-Endosulfan and Lindane. DDT was found to range between 0.15 and 0.19 microg L(-1), beta-Endosulfan ranges between 0.21 and 0.87 microg L(-1), alpha-Endosulfan ranges between 1.34 and 2.14 microg L(-1) and Lindane ranges between 0.68 and 1.38 microg L(-1) respectively. These concentrations of pesticides in the water samples were found to be above their respective Acceptable Daily Intake (ADI) values for Humans.     

Recycling of waste PET into useful textile auxiliaries

Polyethylene terephthalate (PET) waste fibers were initially depolymerized using a glycolysis route in the presence of sodium sulfate as a catalyst, which is a commonly used chemical and ecofriendly as compared to heavy metal catalysts. Good yield of the pure monomer bis(2-hydroxyethylene terephthalate) (BHET) was obtained. Further, to attempt its reuse, the purified BHET was converted to different fatty amide derivatives to obtain quaternary ammonium compounds that have a potential for use as softener in the textile finishing process. The products were characterized by infrared spectroscopy. Application of these synthesized compounds was carried out on cotton fabric; they were evaluated for performance and were found to give good results. The chemicals used during depolymerization and reuse of PET are inexpensive and comparatively less harmful to the environment, and thus offer advantages in the chemical recycling of polyester waste fibers.     

Spatio-temporal assessment of ambient air quality,their health effects and improvement during COVID-19 lockdown in one of the most polluted cities of India

Environmental Science and Pollution Research - The present work aims to investigate seasonal variations in air pollution levels in Lucknow and assess the ambient air quality of the city together...     

Mercury and other metals in eggs and feathers of glaucous-winged gulls (Larus glaucescens) in the Aleutians

Levels of mercury and other contaminants should be lower in birds nesting on isolated oceanic islands and at high latitudes without any local or regional sources of contamination, compared to more urban and industrialized temperate regions. We examined concentrations of arsenic, cadmium, chromium, lead, manganese, mercury and selenium in the eggs, and the feathers of fledgling and adult glaucous-winged gulls (Larus glaucescens) nesting in breeding colonies on Adak, Amchitka, and Kiska Islands in the Aleutian Chain of Alaska in the Bering Sea/North Pacific. We tested the following null hypotheses: 1) There were no differences in metal levels among eggs and feathers of adult and fledgling glaucous-winged gulls, 2) There were no differences in metal levels among gulls nesting near the three underground nuclear test sites (Long Shot 1965, Milrow 1969, Cannikin 1971) on Amchitka, 3) There were no differences in metal levels among the three islands, and 4) There were no gender-related differences in metal levels. All four null hypotheses were rejected at the 0.05 level, although there were few differences among the three test sites on Amchitka. Eggs had the lowest levels of cadmium, lead, and mercury, and the feathers of adults had the lowest levels of selenium. Comparing only adults and fledglings, adults had higher levels of cadmium, chromium, lead and mercury, and fledglings had higher levels of arsenic, manganese and selenium. There were few consistent interisland differences, although levels were generally lower for eggs and feathers from gulls on Amchitka compared to the other islands. Arsenic was higher in both adult feathers and eggs from Amchitka compared to Adak, and chromium and lead were higher in adult feathers and eggs from Adak compared to Amchitka. Mercury and arsenic, and chromium and manganese levels were significantly correlated in the feathers of both adult and fledgling gulls. The feathers of males had significantly higher levels of chromium and manganese than did females. The levels of most metals in feathers are below those known to be associated with adverse effects in the gulls or their predators. However, levels of mercury in some gull eggs are within a range suggesting that several eggs should not be eaten in one day by sensitive humans.     

Concentrations of organochlorine insecticides in edible oils from different regions of India

In this study, organochlorine insecticides (OCPs), DDT metabolites and HCH isomers were quantified in mustard, groundnut and sunflower oils collected from different regions of India. The maximum level of 222.0 ng g(-1) and minimum level of 0.2 ng g(-1) of SigmaDDT were detected in mustard oil from Deoria and Varanasi while those of SigmaHCH i.e., 1500 ng g(-1) and 8.0 ng g(-1) in mustard oil from Deoria and Kanpur, respectively. However, the maximum total concentration of alpha-, beta- and gamma-HCH was in mustard oil, whereas maximum delta-HCH was in groundnut oil. However, the maximum percentage of p,p'-DDT was in mustard oil while maximum p,p'-DDE was in groundnut oil. The study calls for periodical monitoring to ensure safe supply of edible oils to consumers.     

Impact of sterilants on culture establishment of indigenous Musa L. varieties: a step forward for conservation

Environmental Science and Pollution Research - In this paper, we are focusing on study of the impact of sterilization on culture establishment of indigenous Musa variety to restore plant diversity...     

Sustainable Water Purification and Energy Generation Over Crystalline Chitosan Grafted Polyaniline Composite

Journal of Polymers and the Environment - The present research demonstrates the design and development of a dual-compartment water purification proto-plant for microbial degradation of organic...